Made in America | Patent # US 9,7700,102 B2
Frequently Asked Questions
There are three ways to shape aluminum – Formed with a press; broken with a brake (bending and folding); and extruded. Extruding aluminum is the process of forcing heated aluminum through a die that gives the desired shape. The benefit of extruding is a precise shape that is lean, time saving and exact with every piece manufactured.
Our shelves are strong, which is another benefit from extruding. The upper rim and rounding of the front and rear of the pans 2" rim is reinforced with thicker aluminum to provide strength for heavy duty usage. We tested our twelve-foot unit with 2000 lbs of concrete blocks, which is one of our videos, but we don't recommend you try this at home. Remember not to over load your units while in motion and always secure any heavy equipment.
Yes, provided the rental is equipped with horizontal railing. We have special brackets for the occasional odd fit.
Minutes. Our shelving is designed for quick and easy use.
That's what makes our shelves special. PRF Shelves transfer the weight of the load through its four legs to the floor. The force is minimal against the wall, since the system attaches to the wall for stability and positioning only.
Yes, pans are available in desired lengths.
Yes, we can make whatever width and length needed. Standard sizes are 4, 6, 8,10 and 12 feet long and 22" wide.
Yes, we can custom make multi-level units. (see our Gallery Page, videos and other pages for ideas)
Yes, our standard sizes are 4, 6, 8,10 and 12 feet long by 22" wide with a 2" pitch lip all around the pan. Our shelves can be removed and easily temporarily used in a rental truck during peak season or while your box/cargo truck is in the shop.
FedEx Specs for step van: The van should be equipped with package shelves, two per side, full length of the body. They should be approximately 24" deep with a 1" to 2" pitch and a front lip not to exceed 2" height. Top shelf to bottom of roof or roof bow should be 24" minimum. The lower shelf lip to the bottom of the top shelf should be approximately 24". Aluminum is the preferred material.
FedEx Specs for cargo van: van should be equipped with package shelves at least on one side, full length of the body. Recommended depth is 24"-27" deep. 1" to 2" pitch with a front lip not to exceed 2" height. Aluminum is the preferred material.
Yes, PRF is always looking for good companies to partner. Please contact us for inquires.
Absolutely! First, our shelving systems are made of aluminum which is a recyclable material. Second, equipping trucks (peak season and other times) with shelving will increase efficiency of truck usage and in return means less trucks on the highways equals less emissions.
Truck rental companies for the first time have a way to offer an accessory, (ie: PRFect Shelving Solutions) to their clients that will greatly aid their efforts in delivering peak season package volume, saving their clients’ time and money, all while the rental companies capitalize on the shelving accessory.
The PRF Shelving system is built for indefinite use. Once a rental / Cargo / Box truck reaches its life expectancy and is due for upgrading or replacement, the PRFect Shelving system can be removed and placed in the new replacement truck. It is a onetime purchase.
No, our units can stand alone, move from truck to truck, or building to building, or truck to building.
They can be used in box trucks, rental trucks, cargo trucks, open and enclosed trailers, vans, freezers and freezer trucks, toy haulers, rail cars, campers, boats and ships, restaurants, used for catering, hotels, schools, business use, warehouses, garages, storage sheds, self-storage units, utility spaces, commercial storage, moving trucks and trailers, plumbers trucks, electrician trucks, military uses, contract drivers ( FedEx, Amazon, UPS, USPS). These are just a few of the uses of the PRFect Shelving Solutions systems.
PRF Blog
YouTube
Facebook
Instagram
LinkedIn
Twitter
